The size of water softener required for your car wash depends on the size of the RO system.

Softener Type Features
9F Twin Alternating Tank Water Softener
  • Fiberglass Tank
  • Polethylene Brine Tank
  • Two Mineral Tanks
  • Water Meter
  • 9000 or 9500 Fleck Valve
  • Never runs out of water
  • Uses only one tank while the alternative tank regenerates
  • Larger Pipe Size
  • Larger Flow Rate
Single Tank Softener
  • Single Fiberglass Tank
  • Polythylene Brine Tank
  • All Brass Head
  • Simple Operation
  • Inexpensive to purchase
  • Regenerates per time clock
On-Demand Water Softener
  • Single Fiberglass Tank
  • All Polyethylene Brine Tank
  • All Brass Head
  • Adjustable to Meet a Wide Variety of Water Conditions
  • Water Meter to Precisely Time Regeneration
  • Unit Only Regenerates When Needed on Demand Units
Twin Interlock Softener
  • Very High Flow Rates
  • 2900 Series Brass Valves
  • Twin Softeners Interlocked
  • Two Brine Tanks
  • No Raw Water By-pass
  • 2” Brass Head on Each Mineral Tank
  • Two Mineral Tanks
  • 2” Water Meter
Twin Tank Alternating (Stand-By) with Water Meter
  • Twin Softeners - One On-Line - the other on Stand-By
  • 2” Brass Head on Each Mineral Tank
  • No Raw Water By-pass
  • One Brine Tank
  • Two Mineral Tanks
  • 2” Water Meter
  • 2900 Series Brass Valves
Watts Antiscale Water Treatment System
    • Watts Antiscale systems transform Calcium Ions into crystals that are stable and cannot attach to pipes or surfaces

1” Pipe size on Filter tank

  • No Brine tank
  • Simple in and out filter tank
  • Used as an alternate to water softener
  • No Backwash
  • Maximum Hardness is 25 grains per gallon

Water Meter Ranges

Water Softeners are available with an standard water meter or extended range water meter. The type of water meter required depends on the hardness of the water at your facility.

 
3/4” Standard 125 - 2,100 Gallons
3/4” Extended 625 - 10,500 Gallons
1” Standard 360 - 5,000 Gallons
>1” Extended 1,800 - 25,000 Gallons