Top washer components focus on cleaning the front and top of the vehicle.
These friction elements get rid of dirt without hurting the car. Most tunnel systems, beside touch free systems, need at least one top washing component.
Features:
- Stainless Steel
- 1 Rack
- 80 Soft Cloth Curtains Hydraulic Drive
- Optional Electric Drive
Dimensions:
| Length | 5’ (1.52 m) |
| Height | 10’6” (3.20 m) |
| Vehicle Clearance | 90” (228.60 cm) |
| Optional | 96” (243.80 cm) |
| Optional | 102” (259.10 cm) |
Diagonal Touch Mitter & S 20 Mitter Brochure
mitter baskets that hold 80 cloth curtain strips. The baskets move in an opposite diagonal direction diagonally opposite creating a figure eight curtain motion. This unique motion cleans the top horizontal surfaces of any vehicle and does an excellent job of cleaning hard to reach vertical surfaces. The unit is available with frames constructed of stainless steel or aluminum.
The cloth mitter baskets and drive rods are all made of stainless steel to provide the extra strength and rigidity required to minimize torsion stress and increase the longevity of the component. The HFTM is available with either direct drive hydraulics or electric motors. The electric drive system utilizes a gearbox to control rotation speed.
Standard Dimensions:
| Length | 7’ (213cm) |
| Width | 12’2” (371cm) |
| Height | 10’6” (320cm) |
| Ceiling Height Minimum | 11’ (340cm) |
| Operating space | 7’ (213cm) |
| Standard Clearance | 90” (229cm) |
| Optional Clearance | 96” (244cm) |
Technical Specifications:
| Hydraulic Drive | Flow 3 GPM (11.4 liter) @ 500 PSI (34 Bar) |
| Speed | 30-35 RPM |
| Electric Drive |
|
| Water Flow | 12 GPM @ 40PSI (45.6 LPM @ 2.75 Bar) |
| Cloth Type | Non-Woven Textile |
Design Features:
- Two Mitter Cloth Baskets
- 80 mitter cloth panel strips
- Water Manifolds and Nozzles Included
- Free Standing (Aluminum frame in free standing model only)
Construction:
Stainless Steel or Aluminum Frame, Stainless Steel Baskets and Drive Rods
Finishing Touch Mitter Brochure
Gently washes top of vehicle to ensure a through clean in
shorter tunnels!
The HSS-2 is available with stainless steel or aluminum frames. The cloth mitter baskets and drive rods are made of stainless steel to provide the extra strength and rigidity required to minimize torsion stress and increase the longevity of the component.
The system operates with either electric or hydraulic drive motors. With the electric drive option a variable frequency drive is recommended to increase motor life.
Component Assembly:
Standard Dimensions:
| Length | 7’ (213cm) |
| Width | 12’2” (371cm) |
| Height | 10’6” (320cm) |
| Ceiling Height Minimum | 11’ (340cm) |
| Operating Space | 7’ (213cm) |
| Standard Clearance | 90” (229cm) |
| Optional Clearance | 96” (244cm) |
Technical Specifications:
| Hydraulic Drive | Flow 3 GPM (11.4 liter) @ 500 PSI (34 Bar) |
| Speed | 30-35 RPM |
| Electric Drive |
|
| Water Flow | 12 GPM @ 40PSI (45.6 LPM @ 2.75 Bar) |
| Cloth Type | Hanna Soft Cloth Component Assembly Specific |
Design Features:
- Four Mitter Cloth Baskets
- 192 Cloth Curtain Strips
- Water Manifolds and Nozzles Included
- Hydraulic or Electric Drive
Construction:
- Stainless Steel or Aluminum Frame
- Stainless Steel Baskets and Drive Rods
HSS2 Mitter
Choose the most dependable and reliable Top Brush in the industry!
The brush action is very smooth over the contour of the vehicle and Hanna’s exclusive brush design is also the quietest top brush available in the market today. Hanna’s exclusive counterweight design utilizes dual dampening pneumatic cylinders for constant and gentle brush penetration over the hood, roof and trunk of the vehicle. The smooth rotational motion allows for cleaning coverage capable of reaching the front hood of low vehicles as well as the top rear of SUV’s. This all fits in 8 feet of tunnel space. Hanna’s versatile top brush easily fits into a variety of Hanna’s current frame structures allowing for the stacking of multiple components in tight spaces. The Hanna Rotary Top Brush also retrofits into nearly every generation of Hanna Car Wash System.
Standard Features:
- All stainless steel frame construction
- Designed to clean horizontal surfaces using rotating foam brush action.
- Includes spray manifold and jets only
- Hydraulic Drive
- Includes Water & Hydraulic Plumbing
- Hydraulic flow controls and solenoid valves are included in proportionator pricing or purchased separately
- Top Brush available in Blue or Black. Other upgrade colors available for additional cost.
Construction:
- Stainless Steel Frame
- Galvanized Counter Weights
- Includes Soap Foamer Manifold
- Includes Water & Hydraulic Plumbing
- 16 Shammy Discs 60” (1.52 m)
Standard Dimensions:
| Tunnel Space | 8’ (2.43 m) |
| Length | 9’ (2.74 m) |
| Width | 12’ 2” (3.71 m) |
| Height | 10’ 6” (3.2 m) |
Technical Specifications:
| Hydraulic Flow | 6 GPM @ 500 PSI |
| Pneumatic | 0.02 SCFM per car |
| Electrical | 135 watts @ 24 VAC |
| Brush Type | Foam |
Rotary Top Brush Brochure
Features:
- Stainless steel frame
- New woven textile
- Hydraulic drive
Specifications:
| Vehicle Clearance | 96” (244 cm) |
| Speed | 35 RPM |
| Hydraulic | 3.0 GPM @ 500 PSI |